2" Raised Toilet Seat with Handles Elongated

• New elegant design provides extra legroom
• Can be used with existing toilet seat
• Easy to clean
• Weight capacity 300 lbs

If you would like this item in standard please click here.

If you would like this item assembled please let us know.  You can contact us at 416-534-8411 or info@starkmans.com or simply make a note in your online order.

Care and Cleaning

• Regular cleaning is recommended

• Use a non-abrasive cleaner or detergent.  Rinse with warm water and dry completely.

• Abrasive cloths may damage the surface

• Please regularly inspect your raised toilet seat with arms and its parts for any corrosion, breakage, compression or wear

Assembly and Installation

1. Remove all parts from the box: One Seat Riser, two rest arms, two mounting screws, two plastic washers, two metal washers, and two
wing nuts.  

2. Insert the arm into the seat riser as illustrated in the diagrams:

3. Remove the existing toilet seat and lid from the toilet frame by unscrewing the seat screws located at the rear of the toilet seat.

4. Place the seat riser on the toilet frame and align the mounting holes.

5. Place the toilet seat on the seat riser and align mounting holes.

6. Place the metal washers on the toilet seat and align mounting holes with toilet frame.

7. Insert the mounting screws passing through the metal washers, toilet seat, seat riser and toilet frame mounting holes.

8. Insert the plastic washers and the wing nuts onto the mounting screws. Slightly tighten the wing nuts, but do not fully tighten them.

9. Be sure the toilet seat is straight and sits flush on the seat riser, then tighten the wing nuts.